HTC Korea TPS2553D is single-channel High-Side MOSFET switch optimized for adjustable current limited power distribution requiring circuit protection. The TPS2553D series support the following USB requirements. The TPS2553D series supply up to 2.25A as required by USB downstream devices. Maximum continuous current can be different on the types of package and ambient temperature. Switch’s low on-resistance meets USB voltage drop requirement. Flag output indicate fault condition to the local USB controller. Soft-start prevents the transient voltage drop on the upstream port that can occur when the switch is enabled in bus-powered applications. Under voltage lockout (UVLO) feature disables the output switches until a valid input voltage. Auto discharge function quickly lowers the VOUT to the ground level when the TPS2553D turns off. Also the TPS2553D include thermal shutdown to prevent switch failure from high-current loads and reverse current protection circuit to prevent the reverse current from VOUT pin to VIN pin.
TPS2553D features :
- 2.8V to 5.5V operating range
- Adjustable current limit : 200mA to 2.25A(typ.)
- Fold-back short circuit protection
- 90µA typical on-state supply current
- 5µA maximum standby supply current
- Independent open-drain fault flag pin
- Thermal shutdown protection
- Under voltage lockout (UVLO)
- Output auto discharge function
- Reverse current protection
TPS2553D applications :
- USB peripherals
- General purpose power switching
- ACPI power distribution
- Notebook PCs
- PDAs
- Hot plug-in power supplies
Device | Package |
TPS2553DSF6 | SOT-23-6L |
TPS2553D cross reference: |
|
|
|
TPS2553DBVR | TI | NCP380HSNAJ | ON-SEMI |
BD2242G | ROHM | MIC2009YM6 MIC2019YM6 | MICROCHIP |
Part in black : pin to pin compatible |
|
HTC Korea OCP IC switches are designed in South Korea. High quality products, they will match your application needs.